New release of program CarTracker TachoTEK Gen.2-2 ver.2.2.0.291 valid from 30.9.2024. You can download it direct in Main meniu – Update control, but on this page into section „Support – Applications”
The following changes have been made:
– Bugfix: The generation of C-files was not decoded correctly and was not displayed correctly
– Bugfix: In the calibration details of Gen 1 and Gen 2 vehicles, data that is only available from Gen 2.2 onwards is no longer displayed (e.g. sensor serial number)
– Bugfix: In the infringements statistics in the current status of drivers, the tooltip did not display the correct infringements
– Text enlarged in the message window that a driver card should be inserted or that no data is available
– Bugfix: The option to “Import files with signature errors” now also works for Import folders 1/2
– Card readers with the word “Windows Hello…” in the name are now completely ignored
– Tachograph generation was not displayed correctly if different M files were present with different information, e.g. after replacing the tachograph
– Files with signature errors are only imported if this option is set, but the files are not structurally damaged
– The SFTP protocol can be used if port 22 is specified in the FTP-Import settings
– notifikation and automatic updates are corrected
– WPSettings.dat file located on DigiDown device is ignored during automatic file import
– print reports “Infringements” and “Monthly Driver Hours” can now optionally be saved as a series of PDF files
– Buf fix: Report “Infringements” corrected
– Bug fix: The update check works again
– Any unknown time that has not been rebooked manually is now considered a very serious infrimgements
– Missing country entries at the start or end of a shift are now serious infrimgement
– New report “Driver monthly working hours with vehicles”
– Bug fix: Departure control now only checks the first ride in a shift
– Bug fix: activities that were added manually were sometimes counted as multi-driver operations, e.g. when calculating the route
– Bugfix: automatic update search did not work properly
– Bugfix: Error when downloading TeamViewer corrected.
– Bugfix: The wrong (original) country was displayed for Gen. 2 vehicle files.
– The list of drivers and vehicles above the detailed view now has a tooltip that shows on which days the driver was active or the vehicle was used
– Search function for drivers/vehicles added to the windows of the used vehicles or drivers
– New export: Driver of a Vehicle
– Calculation of compensation times for shortened weekly rest periods revised
– Bug fix: The last day of the month was not included in the report on stays abroad
– Bug fix: incorrect display of the duration and severity of the violation “exceeding the average weekly maximum working hours”
– Improved function of importing files from vehicles look here
– Fixed display of state flags for Gen.1 tachographs
– The co-drivers place events were displayed in the driver’s activities in the vehicle activity data
– The names and mileage of the co-drivers were missing from the vehicle activity data
– The travel times and speeds for routes were incorrectly calculated in the vehicle activity data
– In the vehicle view options of the activity data, the “Warnings” option had an incorrect icon
– In the vehicle view options of the activity data, the “Odometer readings” option did not turn the mileage values on/off
– Added setting for Out-of-scope – detail here
– Modification of the report “Driving without a driver’s card” for Stoneridge Gen.2 tachographs
– Added possibility to copy GPS positions to the clipboard
– Modification in the edition for workshops
– Completed module for loading tachographs and driver cards of the 2nd generation, version 2 – also known as Smart 2
– In the case of a multidrive crew, a note added during the Availability activity if it is a rest/break – look here
– Fixed the Night Work report, totals were missing at the bottom
– Automatic import from USB drives can be disabled in Settings
– Built-in program execution logging function to detect exceptions. More in the menu INFORMATIONS.
– Fixed displaying “Shift start/end without country input”
– The end of driving is clearly displayed
– Changing the display of border crossings + displaying the GPS position of drivers
– Fixed “Listindex Error”
– Fixed the error of displaying OUT OF SCOPE activities
– Fixed error of traveled distances in Excel exports
– Bugfix: The start time was badly formatted in the “Driver – Vehicles used” export
– Changing the odometer without driving activity are now marked in yellow and have a short information text
– Display of GPS positions in the main driver window for gen.2
– Workshop edition supplemented with the possibility to enter ID numbers of seals and protective foils and the related export to Excel
– Bugfix “RangeExeption (ListIndex Error)” when downloading driver card
– Report “Driving without a driver’s card” corrected display of zero kilometers
– Report “Statistics – infringements driver working times” fixed bug of counting and clasifications of infringements
– Report “Stays abroad” supplemented by the column “Working time”
– Fixed displaying of driver mileage in summary activity view
– Export to Excel “Drivers shifts summarized times” has fixed column headings for night work
– Report “Driving without a card” supplemented by the possibility to ignore such trips shorter than 1 km
– Fixed errors in night work evaluation and country entry
– Supplemented control report on some points of regulations EC 1071/2009 and 1072/2009 and their amendments 1055/2020, valid from 2.2.2022
(see datails and settings)
– Fixed a bug when evaluating a divided daily rest
– Updated “Help” texts (when pressing F1) and all context to call up the correct help description
– Fixed issue with interval displaying in activity filter
– Added Fault and Event Codes in the Vehicle View
– Fixed display of date format when selecting time zone in Settings
– Removed non-existent “Notifications” in Settings
– Redesigned text in the window indicating the non-inserted USB license key
– Visually changed text when displaying the infringements End/Start without a specified country
– Fixed bug when displaying GPS positions
– Fixed a bug when choosing print reports in Slovenian
– Fixed a bug when setting the default values of Infringements in the English language version
– Extended Edition for small company has been renamed to Small Edition
– Fixed bug when displaying driving recorded before the validity date on the driver card (V2)
– Report “Driving without driver card”, supplemented by the Distance column
– Adapted to UK and Irish legislation evaluation of the “Availability” activity – see settings
– Fixed bug on evaluation of rules 1054/2020
– Setting the options whether availability times should be rated as work, break or availability. Unlike in the past, this is now applied to all views and reports without exception and not just a few selected ones – please see here!!
– The export “Driver shifts” now contains additional columns for night work, in which times are listed that are below the minimum night work time. When exporting driver shift total times, we have adapted the labeling of the column headers for night work. However, the information on night work was already available here as information under the table
– Checkbox for night work control can now only be activated in the options if rule 2002/15 is also activated
– Infringements of the night work rules are now only printed in the Infringements report if rule 2002/15 is also activated
– Settings for night work are now only printed in the header Infringements report if rule 2002/15 is also activated
– Settings for availability mapping are now printed in the header of infringements report
– Only those infringements can be selected for printing in the last screen before run the infringements report that are also checked in settings (Main menu -Settings -Infringemenst)
– FTP access issue is fixed
– Fixed bug when displaying detailed speed
– Fixed driver / vehicle deactivation error
– Faster data retrieval at program start with a large number of drivers and vehicles
– Fixed a bug when evaluating Infingements when changing daylight saving time.
– Added Polish language
– Revised and supplemented translations in Hungarian
– Fixed export to Excel for Turkish KyTy regulation
– The default values of the “Infringements” parameters are set on the first start after installation
– New “Info window” in which addresses, e-mail, phone can be changed online. The window contains the logos of all sellers
– Regulation 1054/2020 applied in evaluation
